Pressure Switch - Adjustable, SPST-NO, Stainless Steel 3010/3029

2004 Emerald Spa. Showed 'FL' code. Old pressure sensor rusted out. Old sensor showed 2psi and dialed in perfect.

The part we ordered was a replacement/repair for a 20+ year old spa. It was the right part. We had no problems with ordering, shipping, receiving. The spa is working again.

This replacement pressure switch works perfectly. Heater now working properly since flow is detected.

This sensor finally fixed the fault that was being registered on the panel after the tub heated up and then when you try to turn on the pump, it would send a fault and shut down the system.

Worked with no problems

The switch is installed at same level as the water surface
I did set it to minimal pressure and it properly disconnect when pump doesn’t run. I should move dial to higher pressure to ensure that the heater doesn’t start without the pump ON. It works fine as it is now for 5weeks

Everything was as promised. Part worked as advertised.

All I can say is that I needed a pressure switch for my hot tub and went online and googled it and your name came up and the switch was a good price and I ordered it and it was delivered in record time. I will use Spa Depot if I need any more parts.

This item was an easy replacement for the original.

I guess you need to adjust it your self, it came non adjusted. I needed to adjust it a couple of times for it to stop throwing the LF code, its been working for a couple of weeks now, I'm sure it'll last a long time :)) Happy with the price and it being all stainless steel, not plastic:)

It was easy to install

This works very well

SpaDepot had the replacement part for my spa at the best price I could find on the internet. Fast shipping too.

cheerful and knowledgeable assistant on phone, very short shipping time, correct part, and price was way less than other sources.

I fixed my spa with this

It was a perfect match of the old one that I had. Was easy to install and it works perfect!

I talked to a tech on a chat line. He was extremely helpful ab and knowledgeable.he told me exactly what I needed and all I had to do was click on the link he provided. Priced less than others, fast delivery. He saved me a 135.00 $ service call

Fixed my 18 year old Catalina hottub, fast shipping and an easy install.

product works great

Replaced a leaking pressure switch. Exact replacement, very easy, 5-minute repair. Thanks Spa Depot!

the stainless model eroded so i'm trying the plastic one. They say the stainless one is an upgrade and is supposed to last longer but the threads on mine eroded and began to leak after 3 years. Ph is always around 7.

Fit and worked first time Our Hot tub is up and running

We have a beautiful octagon shaped spa for the past 15 years years and the flow switch after 15 years went. Very inexpensive part easy to install fast service

I used this switch to replace a cheap plastic .5 psi switch that would not always turn off - stuck on frequently. It was set to about 3 psi and it turns on and off properly now. Adjustability is a great feature. The quality of this switch was much better than the one it replaced.

L

This was a direct replacement for my existing pressure switch

Used to repair a 1999 Great Lakes Spa, worked perfectly and Spa is back in working order!

Worked as described. Thanks.

the title says it all

Very helpful online and phone support staff. Ordering was quick and easy. Delivered the next day. This is my ""Go To"" supplier.

Works fine

Easy to installed works great!