EasyPak 2002 Low-Flow is the super-value compact electronic spa control system. Designed for easy installation, the compact remote mount low-flow heater easily replaces bulky OEM low-flow heaters. You choose the right options for your spa and the controller comes configured to your preferences. Voltage selections are easily convertible at any time (240V/120V). 240V systems utilize 4-wire electrical service.
Your Easy Pak comes with the easy-to-use VDS™ Visual Diagnostic System, making future troubleshooting a breeze. Labeled indicator lights illuminate when a malfunction occurs, targeting any issues with components & avoiding time-consuming repairs or costly service calls.
Standard Circuits: Pump 1, Circ Pump, Ozonator, Light, Heater
Optional Circuits: Pump 2, Blower
Optional Upgrades: Starburst 18 or 36 LED vivid color light
Included with your new EasyPak:
- Low-Flow Remote Mount Heater
- 4.0kW @ 240V (operates at 1.0kW @ 120V)
- Programmable Topside Control Keypad 2-7/8” x 7” w/10’ cable
- Topside Adapter Plate: 8.5” x 4” (optional use)
- Color-coded power Cords
- 3/4” Barbed Flow Switch
- 1” x 6” Clear Tubing, (4) Stainless Clamps & (2) 3/4" Adapters
- Installation Guide
Product notes: 240V systems must be connected to an approved GFCI-protected 4-wire electrical service. 120V systems must be served by a grounded, GFCI-protected circuit, or have an optional inline GFCI cord installed, also properly grounded (related Products links below). Low-Flow heater requires a minimum water flow of 15 GPM. Compatible with Laing, Grundfos, and Waterway 3/4” or 1” circulating pumps. User and Electrician's Guides included. 2-year factory warranty. Sorry, not shippable outside the contiguous-48 USA.
More information:
Hot Tub Service Wiring Explained
Spa Pack Installation
Pump 1 Circuit:120V or 240V up to 5hp – 1 or 2 Speed Pump – 13A max
Optional Pump 2 Circuit:120V or 240V – 1 or 2 Speed Pump – 13A max
Circ Pump Circuit:120V or 240V – Continuous circulation – 5A max
Ozone Circuit:120V or 240V – Must be same voltage as Circ Pump – 2A max
Optional Blower Circuit:120V or 240V - With 48" cord - 8A max
Light Circuit:12V – With 8’ Cord – 1A max
Digital Topside Control:7 button programmable keypad – 10’ cord
Low-Flow SS Heater:120V or 240V Remote Mount – 4kW – 5’ cord
Panel Indicator:Heat On Light
Temperature Sensor:Heater mount or optional drywell mount (available separately)
Overheat Protection:Heater integrated - Manual Reset
Power Cords:Color-coded - Provided for each circuit - 4'
Case:Rust-free Aluminum