Cover Valet Spa Cover Lifter is suitable for freestanding and in-deck spas. Gas springs assist lifting and lowering cover. Safety feature locks cover open until time for closing.
- Choice of widths - up to 90" or 91" to 100"
- Mounts to cabinet, or deck for sunken spas
- For rectangle-shaped spas
Product notes: Not for round or octagon spa shapes. Install mounting brackets on smooth surface. Needs only 3" side clearance, and 6" rear clearance. Maximum cabinet radius: 13". Model widths CV250 and CV400.
Type: Hydraulic Dual Gas Shocks - Medium Duty
Mounting: Deck/Spa Top or Spa Side
Max Cover Width: 90"
Ok for In-Deck Spas: Yes
Clearance Required: Rear: 6" / Side: 3"
Shape Limitations: Not for round or octagon spas, or cabinet radiuses over 13"
Warranty: 5 Year Limited Warranty
Fit perfect worked perfext
Great customer service, they called me to double check measurements, product arrived before quoted delivery date, easy to install, looks great and keeps my jacuzzi water Hot! Nice job SpaDepot!
Bought this in October, then at the end of February the brackets were damaged due to the ""safety"" feature on the one side. After then we could no longer open the cover at all, so we've since completely taken the liter off. So bummed. Back to the drawing board but really can't spend another $170+!
A little bit of a project to install but not that bad, took me about 1 hour.
Purchased a new spa and got tired of dealing with the tub cover. Was very pleased with the speedy delivery and the high quality components for this tub lifter. Install was very straight forward and operation is super simple. Makes using the spa that much more enjoyable.
Our cover lifter was damaged in a storm. This was exactly what we needed. Easy to install too!
VERY EASY TO USE. HAD TO HIRE A HANDYMAN TO INSTALL.
I installed this lift two weeks ago and a guest forced the cover closed bending the bracket that holds the locking lift assist. In need of replacement parts
Poor design all around. Yes, it has very limited side clearance, but so much so that I need to make spacers to go behind the bracket to handle the slight (~1in) difference between cabinet and shell. Does not lift any easier then previous lift without hydraulic struts, and cover does not close properly (overhand edges get stuck under). Have had installed for about 3 weeks (used a handful of times) and 1 strut is already bent. Finally, it does not have a full bar across the top (short stubs that go in about 1ft) and already seeing the cover begin to rip due to this.
Easy to install and easy to use. Love this much more than my old one.