Clear Silicone Spa-Pool Adhesive Sealant

I used to"seal" a pipe leaking on my pool equipment, it stopped most of the leak but there was still a drip but the main goal was to get enough pressure to get the pool up and running and it held will enough to do that and gave me time to get a permanent solution in place, worked fine for what I needed.

I patched a hole in my hot tube and it completely sealed the hole.Very satisfied with the product.

This silicone worked great to seal a leak around my swim spa swim jet. I used 3 tubes of it but it should never leak again.

This product works great , I use it to make gaskets and repair jet seals.

Been using it for many years. Never any call backs with something leaking.

My hot tub underwater light started leaking. I sealed the light with Boss 802, let it cure for 24 hrs and now I have no leaks. It's very easy to apply.

My infinity pool was leaking, partly due to the old caulking coming completely off. I stripped the old caulk out and replaced it with Boss Pro 802 and the pool is no longer leaking. This stuff sticks like glue! I do wish it came in more colors though...

Super easy flow makes it easy to apply. My 26 year old hot tub is still kicking, in part to this silicone adhesive and the spa depot.

We have literally purchased 1000+ of this product. For what we use it for, there is NO COMPARISON

I had a small leak around the filter in our hot tub and this silicone worked like a charm.

Installed a new light with the Silicone. It has been a week and no leaks. Works as expected. I would recommend this product. Thanks.

I had leaks around my marine speakers and one air control valve, I removed all pieces and laid a bead around each hole. I was able to check for leaks within 10 plus minutes. worked great. prior I tried standard bath and kitchen caulk didn't work.

Great product!

Small , slow leak in spa. Tried this 3x, no improvement. It's a risk. Worth the try before contacting store.

had a leaky hose after replacing a jet pump. This stuff did the job of sealing up that joint. It is a must if you are replacing your pump. Wish I had known to buy this with the pump.

Worked great 👍

Hot tub began loosing water rapidly. Discovered a leaky filter housing. Removed all the old silicone, cleaned well, applied the Boss 802. Let sit 24 hours since it is submerged in the water. Seems to have done the trick. No issues since. . Easy to work with and tool. Nice product.

ok great

Excellent product!

I use this in my pool and spa service repairs. Box store silicone caulk doesnt come close to sticking for long term repairs.

Good bonding product

Used this to seal leaking jets. Once cured, it seems to hold up well.

This sealant is perfect for our spa application.

I put this around every fitting on the inside of my tub, as I had a leak but didn't know where. I let the tub dry for 48 hours, filled it with water and no more leak!

Used to seal bulkhead fittings no leaks, works great

Just make sure you put it on the dry side ^_^ other than that no leaks.

I bought a stock tank then found out it had a small leak, bought this and applied it and worked perfectly! It's been a couple weeks and still no problem.

We have a Jacuzzi, Laser hot tub which is known by folks in the business as a ""Dinosaur"". As would be the nature of materials used to form it, over its 30 years of existence, things dry up & shrink. Water sealed joints and over-laps [particularly with the skimmers] begin to leak. If fact, leakage was to such a point that I used 6 mill poly to form a pan underneath the tub which collected the water into a 5 gal bucket. This was after I tried varieties of construction adhesives &/or silicones to stop the 20 gallons of leaking, daily. After about a year & 1/2, since I used the Boss 802, the tub still doesn't leak anymore. I've kept the 6 mill pan w/ 5 gal bucket & check it whenever to find rain water. Before I calked, I made sure ALL the areas were thoroughly cleaned with rubbing alcohol as a rinse. Allowing plenty of time to dry, I used the Boss 802, making sure the joints were filled. [no time to skimp!] I waited a full 5 days for curing before refilling the tub; to the top of the skimmers! Great Stuff! I'm purchasing more as I have found it very useful in several other types of applications.

The silicone worked very well. I received the order promptly and in good condition.

Bought this product to reseal my jacuzzi jet, work very well no more leaking

use this along with a new thermowell to replace an old leaking one. No more leaks now, sealed up nice and I'm very happy with the results

Does what it says!