Balboa BP7 5.5kW Spa Control Kit - Up to 3 Pumps + Circ Pump

Had a relay stuck on the old board of a 10 year old tub. Ryan in Tech Support helped me try several things before suggesting part replacement.
Not canned BS suggestions but real stuff. Keep that guy!!!
Anyway, bought the replacement pack and installed myself.
Surprised as you know what when everything worked and no leaks!
Attached old and new pics.

I recently acquired a free 2006 Dynasty Spa. I replaced both motors (one was seized up) finally got power to the spa and found out the old Balboa VS501Z Spa pack had a short in the circuit board. I contacted SpaDepot and asked them what the direct replacement would be, they told me that the Balboa BP7 5.5kW Spa Control Kit - Up to 2 Pumps + Circ Pump, Upgradable to 3 Pumps would be the replacement. I ordered it online on Monday and received it on Friday. Installation was a breeze, same dimensions as the old spa pack and all of the old plugs for the motors plugged right in. I call for technical support to make sure I plugged the motors int the right slots on the circuit board. Amy took my call and let me know that one of the pumps needed to be plugged into a daughter board in order to function properly, as well as letting me know that the A/V plug needed to have the jumper changed. It has been two weeks now since I installed the replacement spa pack from SpaDepot and I cannot be any happier! Thanks SpaDepot!!

I ending up dealing with at least 4 different employees during my project and all of them were very nice and helpful. I find this level of customer service is pretty uncommon the days.

I bought my spa in 1992 and this is the third control unit installed in it. The BP7 is well designed and installation was easy. The topside control panel covered all three of the old air actuators. I'm very happy with it and hope I get another 15 years from it. Tech support was great too. The high and low wires were swapped at the motor (when on low speed on the controller I was actually in high speed mode) They told me to swap the red and black wires. Did the trick.

Was able to replace our old controller and heater and topside display. It slipped into our existing plumbing and was very easy to install. The only connections we needed were power, pump and light. We also replaced the pump and got everything dialed in. Highly recommended.