This is a premium AquaFlo XP2e Wet End for spa and above ground pool pumps. Our wet ends are the ideal replacement if your motor is in satisfactory working condition. Factory-assembled with all components.
- 48-Frame wet end housing, volute & cover
- Side discharge
- Impeller for 2HP
- Pump seal
Product notes: Other associated part numbers are 34-402-1206, 3440211206, 91041820-000, 91041820000. Not compatible with LX/ITT Intertek motors. Pump plumbing sizes are nominal, and not actual outside diameter (OD) of the threaded intake or discharge. Use a tape measure to compare your old pump thread size (as well as motor frame size) to illustrations above. Some brands of hot tub spa pumps (such as Hayward Jacuzzi and Sta-Rite) use non-standard fittings with different dimensions. Please contact us for assistance.
Replaced old pump that had leak seals. Works good!
Exact replacement part. Connects up to pump motor and plumbing lines without a hassle
Great product. Fit perfect
Hot tub repair for a friend, rebuild motor.
So far this wet end works great. Enjoying the hot tub once again.
Just the part we needed
Although my pump is a 3.6 HP , Spa Depot agent was able to assure me this wet end would be equivalent to replace. It is practically identical except for hose tap adapter placement and was easy to install. My spa pump is running like new.
Part was quality and as described.
Faceplate of pump improperly milled. It leaked out of the box. Wasted time trying to run down reasons for the leak on a new pump. Finally, switched out the new face plate for the old pump face plate - no leaks! Otherwise, the pump functions as it should.
I'm not sure how, but the Impeller broke after the first usage, causing the water to spew back through the motor and out the rear end. This may have been just a single instance, but I suspect the quality of this wet end housing, in particular the impeller to be of poorer quality than the original unit. I am going to buy the entire pump with motor now.