This is a premium Aqua-Flo / Gecko Wet End for Flo-Master HP series spas and above ground pool pumps. Our wet ends are the ideal replacement if your motor is in satisfactory working condition. Factory-assembled with all components.
- 48-Frame wet end housing, volute & cover
- Side discharge
- Impeller for 2 HP
- Pump seal
Product notes: Other associated part numbers are 91040730, 34-402-1028, 344021028, 91040730-000, 91040730000, 310-7840. Pump plumbing sizes are nominal, and not actual outside diameter (OD) of the threaded intake or discharge. Use a tape measure to compare your old pump thread size (as well as motor frame size) to illustrations above. Some brands of hot tub spa pumps (such as Hayward Jacuzzi and Sta-Rite) use non-standard fittings with different dimensions. Please contact us for assistance.
Perfect replacement for my 10 year old pump that failed due to a leaking seal.
The cover have only one outlet for 3/8 tubing , i have too tap threads and drill 3/16 holes for second . Installation was fine after.
Fit on my existing motor pumping water no leaks
He answered questions quickly and helped us get the right part for our hot tub.
It works, but is very noisy
I installed in my hot tub and it leaked. I had to remove it and install my old cover on the pump, because it wasn't sealing on the o-ring. My old pump cover sealed just fine.
Got me up and running quickly. Thank you
I have never had luck removing an impeller to replace a seal. This was an inexpensive replacement and very easy to replace.
Very pleased with the quick delivery