|
Reduced water flow.
Components
associated:
A) Check your filter(s). If flow is normal with filter removed, then clean
filter cartridge, or replace if more than 1 year old. If
flow is still low, proceed to 2).
B) Check spa
water level. Bring up to recommended level if necessary.
C) With the power to the spa disconnected, remove the suction end pipe of pump wet end. Inspect inside for debris which has obstructed any area of the
impeller; remove debris. Check for damaged impeller.
If damaged, replace.
D) Check for obstructed or misadjusted jets.
 Back
to Troubleshooting Guide
Illustrated
Glossary
|
Spa Pump -
Exploded Diagram |
- Housing Bolt
- Wet End Cover
- Cover Gasket
- Impeller
- Seal Assembly
- Wet End Housing
- Housing Nut
- Through-bolt Motor
- Motor Thru Bolt
- Union O-Rings
- Unions
- Drain Plug
|
 |
|
|
