Every 240 volt hot tub installation needs a Spa GFCI
Disconnect Panel. Ours is designed for easy installation by the
qualified do-it-yourselfer or electrician and provides GFCI protection for hot tubs requiring 3
or 4 wire feeds. For spa loads up to 60 amps (or less)!
While other brands are not
specifically designed for spas, the Connecticut Electric Load Center is far superior, featuring an
interference-shielded 60A
GFCI breaker which is tolerant of voltage fluctuations for maximum safety and equipment
protection.
Specifically engineered for home portable spas:
Don't waste your money on an inferior
disconnect panel without advanced technology to prevent errant GFCI tripping.
Why this is a better choice for hot tubs:
Unfortunately, conventional load centers often perform unreliably
with hot tubs due to the phenomenon called errant tripping. This
false tripping is a great frustration to homeowners and electricians
alike, often incorrectly attributed to a problem with the spa, when
no problem exists.
Because of the reactive loads that spa motors present and the fact
that parts of the spa including ozonators may run on 120V, common
GFCI breakers sometimes react to a normal spa condition as if it
were a ground fault. They can be very unreliable.
Our GFCI Disconnect panel solves these problems. It's a dependable
ground fault detector designed just for hot tubs. The
specially-shielded GFCI prevents false tripping due to RF
interference. It is also engineered for low-voltage stability to
prevent tripping due to brownouts. If there is a ground fault, the
fast-acting GFCI instantly disconnects the lines.
Some jurisdictions REQUIRE the
installation of a 120V outdoor GFCI outlet, located 10-20 feet away,
enabling safe use of cord-connected appliances and equipment in the
spa area.
Note: The bonus 120V branch circuit has its own 15A breaker, saving the expense of a separate wiring run for an outdoor
outlet. This alone pays for itself! Instructions
included.
Meets National Electrical Code Requirements
NEC code specifies a manual disconnect device at least 5 feet away and within line of sight. Our
high quality disconnect panel meets all requirements. Features an enameled rain-tight enclosure, a heavy-duty fast acting
GFCI, and a 15-amp
branch circuit. Box has knockouts on four sides for hookup versatility.
The included 120 volt branch circuit with breaker allows you to add an outdoor receptacle, deck or landscape lighting, etc. without the need for an expensive additional wiring run to the main panel!
Need help?
Our
Spa
Wiring Guide has all the information you need including a
step-by-step installation movie.
Product notes: Complete step-by-step instructions and wiring diagrams are included. To be installed by qualified individual. Even if you hire an electrician, you'll
normally save money by purchasing this disconnect from us!
For all 240V Spas up to 60A requiring single breaker.
120V Breakerd Circuit for outlet, as required by NEC 680.22(A)(3).
Space for Second 120V Branch Circuit.
Rain-proof Enclosure.
ETL listed for USA and Canada.
Meets NEC Code.
Toll free tech support available.
Easy illustrated instructions included.
7-1/2"W x 13"H x 5"D
1 Year Warranty
FREE Standard USA Shipping Lowest Price Guaranteed
Sign In
